Do not install your dryer where it can be subject to extreme conditions, such as: poor ventilation, temperatures below 5☌ or above 35☌.After installation access to the mains plug has to be guaranteed, or the all-pole disconnection has to be possible with a switch.Mains cable replacement is only to be carried out by After-Sales Service.Contact one of our After-Sales Service technicians. Do not operate the dryer if it has been damaged during transport.Before any maintenance on the dryer disconnect it from the mains supply.
Do not use extension leads or multiple adaptors.The dryer must be earthed as prescribed by law.The manufacturer cannot accept any liability for personal injury or damage to property resulting from failure to adhere to these instructions.Voltage information, power consumption and the required fuse protection is shown on the rating plate mounted at the rear of the dryer.Electrical connection must comply with local Electricity Board regulations.Electrical connections must be carried out by a qualified technician in compliance with the manufacturer’s instructions and current standard safety regulations.Remove the protective foil from the control panel.Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.If the appliance was exposed to the cold prior to delivery, keep it at room temperature for a few hours before operating.Contact After-Sales Service or your local retailer. After unpacking, make sure that the dryer is undamaged.
0 kommentar(er)
